How to Start the Mower and Set the Cutting Height
The lawn looks tidy. The completion counter disagrees. One More Lawn can turn a missed strip into a very long inspection, so start with the mower set correctly and a cut you can follow. That overgrown mess is about to become a lawn worth admiring.
Starting the engine does not switch on the blades. You also need to engage the cutting blades and lower the deck—the housing beneath the mower that holds them. Follow your current on-screen input prompts and control settings when using the dashboard; mouse, controller and wheel setups need not share the same buttons.
Start the mower in three steps
- Hold the ignition key until the engine catches. Get seated, look toward the dashboard controls and use the prompted dashboard interaction. Keep holding the key until the engine runs. A quick tap is not the full startup.
- Engage the blade switch. Use the separate switch for the blades. Engine power gets you moving; this switch gets the cutting blades working.
- Lower and adjust the deck. Use the deck-height lever and watch the height readout as you adjust it. Match the current job’s requested height before entering uncut grass. Elvira’s backyard calls for 5 cm; do not treat that as a setting for every later job.
Know what you are adjusting
| Control or gauge | What to look for and do |
|---|---|
| Ignition key | Find the key on the dashboard near the blade and light switches. Hold it to start the engine. |
| Blade switch | Find the separate blade switch among the dashboard controls. Use it to engage cutting. |
| Deck-height lever | Use the lever that adjusts the cutting deck. Watch the height readout while lowering or raising it. |
| Height readout | Find the cutting-height value on the dashboard display. Read the number and unit rather than guessing from the lever’s position. |
| Fuel gauge | Check the dashboard’s fuel-level indicator before committing to another long pass. |
| Grass-bag gauge | Check the dashboard’s bag-fill indicator. It tracks the collection bag behind your seat, not how much of the lawn is finished. |
Driving but leaving the grass untouched? Stop and check the blade switch, then the deck position and height. If the engine will not catch, check the fuel gauge before repeating the startup. More laps will not persuade a raised deck to mow.
Build a simple mowing routine
Try straight passes with a small overlap into the strip you just cut. Use the visible cut edge to line up your next run. Shorten or change direction around trees, furniture and tight corners instead of forcing one pattern across the whole yard.
At the end of a pass, check both fuel and bag level. When the bag is full, stop, get off and replace it with an empty bag before continuing. Chiquito buys collected grass bags. When fuel runs low, fetch the gas can and refuel the mower; plan that stop before heading into a distant corner.
Use the mower for open ground, then climb down with the string trimmer, the handheld cutting tool, for fences and awkward spaces around objects. If progress stalls near the end, inspect the seams between your passes and the lawn’s boundaries. Those are useful places to check, rather than a promise of where your last tuft is hiding.
The starter riding mower teaches this routine. Retail equipment also includes the Zero Turn, an alternative mower, and tow-behind mowers with one or three cutting decks. Those give you more equipment options, but keep the same habit: check the controls and requested height before making your first cutting pass.

Comments will load when you reach this part of the walkthrough.